Core-Cutter.com specializes in the design and manufacture of turnkey core cutters and core delivery systems. We also offer our customers a full line of core cutter parts and supplies. Our customer base is worldwide and includes many Fortune 500 corporations who trust Core-Cutter.com to provide quality, cost effective core cutter solutions in a timely manner.
Core-Cutter.com brings you a great selection of American Made Core Cutters at prices that fit almost any budget. If you happen to find the same style of core cutter at a lower price, contact us before you buy. Thank you for choosing
Core-Cutter.com
No Sales Tax!
Only orders shipped to Wisconsin are charged sales tax.
Live Customer Service
Site Security
Secure Site
You can have complete confidence when ordering products through Core-Cutter.com. All transactions are processed through
state of the art secured technology.
Manual Core Cutters
EZ-Core Cutter 8"-14":
Your LOW COST SOLUTION to cut cores into any width in SECONDS!!!
Increased Production Made Simple... Increase production, lower cost, and reduce maintenance are the main reason why more and more facilities are replacing old equipment with the EZ - Core Cutter. The quality crafted core cutter is constructed to withstand years of heavy use. BEST OF ALL the return on investment (ROI) for this machine will only improve your bottom line in todays competitive marketplace.
Applications:
• Cuts length: 30" to 1/4" with core stop
• +-0.030” cut tolerance, Clean Edge
• Core size: 8 " to 14", Wall up to 1/2", Lengths up to 120" (without external supports)
• Recycle used or damaged cores
• Electrical: 110V, 60 Cycle, or as needed
• Air: None
• Operator Requirements: None
Optional Upgrades:
• Left Handed Models
• Extended width
Features:
• Razor clean cuts
• Easy to change disposable utility blades
• Compact bench top design.
• Core stop and scale for repeatability and accuracy
Specifications:
General:
Aluminum construction. Bench mounted (not provided).
Fully guarded and secured.
Rubber covered surface drive wheels.
Adjustable core hold down guide.
Operator handle and safety start switch. Handle spring loaded for easy roll loading.
Blade mounted in a holder for blade alignment and cutting squareness. Easy change.
Five (5) spare blades.
Adjustable extendable core stop with scale.
DC Drive, 1/2 HP motor.
Operation is this easy...
1. Lift the cutter arm and load the core to be cut onto drive wheels. 2. Make sure the blade extension is sufficient for the wall thickness to be cut. 3. Set the core stop to the length desired. A quick clamp and scale make this easy. 4. If necessary, adjust the handle pull pressure to avoid excessive or low clamping force on the core. Moving a simple spring pin is all that is required. 5. Adjust the kick guide to the core outside diameter with the simple thumb wheel. 6. Bring the handle down so the blade lightly contacts the core then push the start button with your other hand. 7. Continue gentle pressure until the core is severed. 8. Lift the handle, slide the core to the stop, and repeat as necessary.
Note: For cutting or recycling a damaged core, simply cut around the bad spot.
Additional Photos:
Core-Cutter.com specializes in the design and manufacture of turnkey core cutters and core delivery systems. We also offer our customers a full line of core cutter parts and supplies. Our customer base is worldwide and includes many Fortune 500 corporations who trust Core-Cutter.com to provide quality, cost effective core cutter solutions in a timely manner.
